MIL-M-38510-57 Microcircuits, Digital, Cmos, Static Shift Register, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90 - 91 - 92

MIL-M-38510/57F

J		GDIP1-T24 or CDIP2-T24	24	Dual-in-line
K		GDFP2-F24 or CDFP3-F24	24	Flat pack
N		CDFP4-F16	16	Flat pack
T		CDFP3-F14	14	Flat pack
X 1/	2/	GDFP5-F14 or CDFP6-F14	14	Flat pack, except A dimension
				equals 0.100" (2.54 mm) max
Y 1/	2/	GDFP1-F14 or CDFP2-F14	14	Flat pack, except A dimension
				equals 0.100" (2.54 mm) max
Z 1/	2/	GDFP2-F16 or CDFP3-F16	16	Flat pack, except A dimension
				equals 0.100" (2.54 mm) max
U 1/	2/	GDFP2-F24 or CDFP3-F24	24	Flat pack, except A dimension
				equals 0.100" (2.54 mm) max

1.3 Absolute maximum ratings.

Supply voltage range (VDD - VSS):

Device types 01-06.......................................................................... -0.5 V dc to +15.5 V dc

Device types 51-56.......................................................................... -0.5 V dc to +18.0 V dc

Input current (each input) .................................................................. ±10 mA

Input voltage range ........................................................................... (VSS - 0.5 V) ≤ VI ≤ (VDD + 0.5 V) Storage temperature range (TSTG).................................................... -65° to +175°C

Maximum power dissipation (PD) ...................................................... 200 mW

Lead temperature (soldering, 10 seconds) ....................................... +300°C

Thermal resistance, junction to case (eJC)......................................... See MIL-STD-1835

Junction temperature (TJ) ................................................................. 175°C

1.4 Recommended operating conditions.

Supply voltage range (VDD - VSS):

Device types 01-06.......................................................................... 4.5 V dc to 12.5 V dc

Device types 51-56.......................................................................... 4.5 V dc to 15.0 V dc

Input low voltage range (VIL):

Device types 01-06.......................................................................... 0.0 V to 0.85 V dc @ VDD = 5.0 V dc

0.0 V to 2.1 V dc @ VDD = 12.5 V dc

Device types 51-56.......................................................................... VOL = 10% VDD, VOH = 90% VDD

0.0 V to 1.5 V dc @ VDD = 5.0 V dc

0.0 V to 2.0 V dc @ VDD = 10.0 V dc

0.0 V to 4.0 V dc @ VDD = 15.0 V dc

Input high voltage range (VIH):

Device types 01-06.......................................................................... 3.95 V to 5.0 V dc @ VDD = 5.0 V dc

10 V to 12.5 V dc @ VDD = 12.5 V dc

Device types 51-56.......................................................................... VOL = 10% VDD, VOH = 90% VDD

3.5 V to 5.0 V dc @ VDD = 5.0 V dc

8.0 V to 10.0 V dc @ VDD = 10.0 V dc

11.0 V to 15.0 V dc @ VDD = 15.0 V dc

Load capacitance .............................................................................. 50 pF maximum

Case operating temperature range (TC) ........................................... -55°C to +125°C

1/ As an exception to nickel plate or undercoating paragraph of MIL-PRF-38535, appendix A, for case outlines X, Y, Z, and U only, the leads of bottom brazed ceramic packages (i.e., configuration 2 of case outlines A, D, F, or K) may have electroless nickel undercoating which is 50 to 200 microinches (1.27 to 5.08 µm) thick provided the lead finish is hot solder dip (i.e., finish letter A) and provided that, after any lead forming, an additional hot solder dip coating is applied which extends from the outer tip of the lead to no more than 0.015 inch (0.38 mm) from the edge.

2/ For bottom or side brazed packages, case outlines X, Y, Z, and U only, the S1 dimension may go to .000 inch

(.00 mm) minimum.