MIL-M-38510-245 Microcircuits, Digital, Cmos, 4096 Bit, Static Random Access Memory Sram, Bulk Silicon And Silicon On SapphireThis specification covers the detail requirements for bulk silicon and silicon on sapphire SOS, static, 4096 bit, random access memory microcircuits. Two product assurance classes, four radiation hardness assurance levels, and a choice of case outlines and lead finishes are provided and are reflected in the part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78

MIL-M-38510/2458

TA8LE IV. Delta limits at +25°C.

Parameters 1/	Limits 2/
Parameters 1/	01, 02	03	04	05, 06
IDD	+5 µA	+15 µA	+25 µA	+30 µA
VOL	+60 mV	+60 mV	+60 mV
VOH	-200 mV	-400 mV	-400 mV
IOL, IOH				±10%
IOHZ, IOLZ				±500 nA
IIL, IIH	±50 nA	±100 nA	±100 nA

1/ Conditions and mechanization of measurements shall be as specified in table III, subgroup 1.

2/ Delta limits apply to an increase from the initial value (e.g., pre-life test IIH = -120 nA, post-life test

IIH = -170 nA).

4.5.4 ESDS testing. ESDS testing in accordance with MIL-STD-883, method 3015, will be performed at initial qualification and after any processor design changes affecting input protection circuits.

4.5.5 Quiescent supply current test. When performing quiescent supply current measurements, the meter shall be placed so that all currents flow through the meter.

4.6 Data reporting. When specified in the contract or purchase order, a copy of the following data, as applicable, shall be supplied:

a. Attributes data for all screening tests (see 4.2) and variables data for all static burn-in, dynamic burn-in, and steady state life test.

b. A copy of each radiograph.

c. The quality conformance inspection data (see 4.4).

d. Parameter distribution data on parameters evaluated during burn-in. e. Final electrical parameters data.

5. PACKAGING

5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity within the Military Service or Defense Agency, or within the military service's system command. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.