MIL-M-38510-103 Microcircuits, Linear, Voltage Comparators, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, voltage comparators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73

MIL-M-38510/103H

1.2.3 Case outlines. The case outlines are designated in MIL-STD-1835 and as follows:

Outline letter Descriptive designator Terminals Package style

A	2/	GDFP5-F14 or CDFP6-F14	14	Flat pack
C		GDIP1-T14 or CDIP2-T14	14	Dual-in-line
E		GDIP1-T16 or CDIP2-T16	16	Dual-in-line
F		GDFP2-F16 or CDFP3-F16	16	Flat pack
G		MACY1-X8	8	Can
H		GDFP1-F10 or CDFP2-F10	10	Flat pack
I		MACY1-X10	10	Can
P		GDIP1-T8 or CDIP2-T8	8	Dual-in-line
X		CDFP4-F16	16	Flat pack
z		GDFP1-G10	10	Flat pack with gull wing leads
2		CQCC1-N20	20	Square leadless chip carrier

1.3 Absolute maximum ratings.

Device types

01 02 03 04 and 05 06 and 07

Positive supply voltage +14.0 V +14.0 V +15.0 V +30.0 V +18 V Negative supply voltage -7.0 V -7.0 V -15.0 V -30.0 V -25 V Total supply voltage --- --- --- +36.0 V +36 V Output voltage --- --- +24.0 V --- ---

Output to negative supply voltage

--- --- +30.0 V +50.0 V +36.0 V

Input voltage range ±7.0 V ±7.0 V ±7.0 V 3/ ±15.0 V 4/ Differential input voltage ±5.0 V ±5.0 V ±5.0 V ±30.0 V ±5.0 V

Peak output current 10 mA 50 mA --- --- 25 mA

Sink current --- --- 100 mA 50 mA --- Output short-circuit duration 10 s 10 s 10 s 10 s 10 s

Strobe voltage --- 6.0 V 6.0 V --- ---

Maximum strobe current --- --- --- 10 mA --- Storage temperature range -65°C to +150°C for all device types

Junction temperature (TJ) 5/ +175°C +175°C +175°C +175°C +175°C

Lead temperature

(soldering, 60 seconds)

+300°C +300°C +300°C +300°C +300°C

1.4 Recommended operating conditions.

Supply voltage range : 4/

Device types 01 and 02 ................................................................ +VCC = +12 V dc, -VCC = -6.0 V dc

Device type 03 .............................................................................. +VCC = +12 V dc, -VCC = -3.0 to -12.0 V dc

Device types 04, 05, 06, and 07 ................................................... ±VCC = ±15.0 V dc

Ambient temperature range (TA) ...................................................... -55°C to +125°C

2/ Inactive case outline.

3/ The positive input voltage limit is 30 V above the negative supply. The negative input voltage limit is equal to the negative supply voltage or 30 V below the positive supply, whichever is less negative.

4/ For supply voltages less than ±15.0 V dc, the input voltage rating is equal to the supply voltage.

5/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours maximum) TJ = +275°C.