MIL-M-38510-103 Microcircuits, Linear, Voltage Comparators, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, voltage comparators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73

INCH-POUND MIL-M-38510/103H

18 February 2005

SUPERSEDING MIL-M-38510/103G

03 November 2004

MILITARY SPECIFICATION

MICROCIRCUITS, LINEAR, VOLTAGE COMPARATORS, MONOLITHIC SILICON

Reactivated after 18 February 2005 and may be used for either new or existing design acquisition.

This specification is approved for use by all Departments and Agencies of the Department of Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, voltage comparators.  Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3).

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as shown in the following: Device type                                                                    Circuit

01                                                             Single differential voltage comparator

02                                                             Dual channel differential voltage comparator

03                                                             Single differential voltage comparator / buffer

04                                                             Precision voltage comparator / buffer

05                                                             Dual precision voltage comparator / buffer   1/

06                                                             Dual precision high speed voltage comparator

07                                                             Dual high precision, high speed voltage comparator

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1/  Device type 05 may be monolithic, or it may consist of two separate, independent dice.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to Linear@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                                          FSC 5962