MIL-M-38510-555 Microcircuits, Digital, Cmos, Remote Terminal Interface, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, remote terminal interface RTI microcircuits. One product assurance class class B and a choice of case outlines, and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44

MIL-M-38510/555B

FIGURE 21.  Message error timeout during remote terminal to remote terminal receive (due to no response from the transmitter.

6.6  Logistic support.  Lead materials and finishes (see 3.4) are interchangeable.  Unless otherwise specified, microcircuits acquired for Government logistic support will be acquired to device class B for Department of Defense (see 1.2.2), lead material and finish A (see 3.4).  Longer length leads and lead forming should not affect the part number.

6.7  Data reporting.  When specified in the purchase order or contract, a copy of the following data, as applicable, will be supplied.

a.        Attributes data for all screening tests (see 4.2) and variables data for all static burn-in, dynamic burn-in, and steady-state life tests (see 3.6).

b.    A copy of each radiograph.

c.    The technology conformance inspection (TCI) data (see 4.4).

d.    Parameter distribution data on parameters evaluated during burn-in (see 3.6). e.    Final electrical parameters data (see 4.2d).

f.     RHA delta limits.

6.8  Substitutability.  The cross-reference information below is presented for the convenience of users. Microcircuits covered by this specification will functionally replace the listed generic-industry type.  Generic-industry microcircuit types may not have equivalent operational performance characteristics across military temperature ranges, post irradiation performance or reliability factors equivalent to MIL-M-38510 device types and ma y have slight physical variations in relation to case size.  The presence of this information should not be deemed as

permitting substitution of generic-industry types for MIL-M-38510 types or as a waiver of any of the provisions of MIL- PRF-38535.

6.9  Changes from previous issue.  Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

42