MIL-M-38510-555 Microcircuits, Digital, Cmos, Remote Terminal Interface, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, remote terminal interface RTI microcircuits. One product assurance class class B and a choice of case outlines, and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44

MIL-M-38510/555B

1.4  Recommended operating conditions.

Operating supply voltage range (VDD)  .............................................. 4.5 V minimum to 5.5 V maximum

Minimum high level input voltage (VIH):

Logic inputs .....................................................................................  2.0 V

Clock inputs.....................................................................................  2.0 V Maximum low level input voltage (VIL):

Logic inputs .....................................................................................  0.8 V Clock inputs.....................................................................................  0.8 V

Operating frequency.......................................................................... 12 MHz ±0.01 percent

Operating case temperature range (TC)  ........................................... -55°C to +125°C Duty cycle:

Device type 01 ................................................................................  10 percent to 35 percent

Device type 02 ................................................................................  40 percent to 60 percent

2.  APPLICABLE DOCUMENTS

2.1  General.  The documents listed in this section are specified in sections 3, 4, or 5 of this specification.  This section does not include documents cited in other sections of this specification or recommended for additional information or as examples.  While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2  Government documents.

2.2.1  Specifications and Standards.  The following specifications and standards form a part of this specification to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535   -        Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883       -        Test Method Standard Microcircuits.

MIL-STD-1835     -        Interface Standard Electronic Component Case Outlines.

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3  Order of precedence.  In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence.  Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

2