MIL-M-38510-208 Microcircuit, Digital, 4096-Bit Schottky, Bipolar, Programmable Read-Only Memory Prom, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, programmable read-only memory PROM microcircuits which employ thin film nichrome NiCr resistors, titanium-tungsten TiW, or zapped vertical emitter ZVE as the fusible link or programming element. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54

MIL-M-38510/208F

13/  For unprogrammed device types 01, 02, 04, and 05 (circuit G) select an appropriate address to obtain the desired output state.

14/  For programmed device type 02 (circuit G) apply 4.5 V to pin 24; 10.5 V to pin 1; 3.0 V to pins 23, 19, 18, 8, 7, 6,

4, 3, and 2; and 0.0 V to pins 21, 20, 12, and 5.

15/  For unprogrammed device type 01 (circuit G) apply 10.5 V to pins 6 and 1; 5.5 V to pin 24; 3.0 V to pins 23, 19,

18, 8, 7, 6, 4, 3, and 2; 0.0 V to pins 21, 20, 12, and 5.

16/  For programmed device type 02 (circuit G) apply 10.5 V to pin 1; 4.5 V to pin 24; 3.0 V to pins 23, 19, 18, 8, 7, 6,

4, 3, and 2; and 0.0 V to pins 21, 20, 5, and 12.

17/  For unprogrammed device type 02 (circuit G) apply 10.5 V to pins 6 and 1; 4.5 V to pin 24; 3.0 V to pins 23, 19,

18, 8, 7, 4, and 2; 2.0 V to pin 3; 0.0 V to pins 21, 20, 12, and 5.

18/  For unprogrammed device type 02 (circuit G) apply 10.5 V to pins 1 and 6; 5.5 V to pin 24; 3.0 V to pins 23, 19,

18, 8, 7, 4, 3 and 2; 0.0 V to pins 5, 12, 20, and 21.

19/  For programmed device type 04 (circuit G) apply 10.5 V to pin 16; 4.5 V to pin 20; 3.0 V to pins 1, 2, 3, 4, 5, 18, and 19; 0.0 V to pins 10 and 15.

20/  For programmed device type 05 (circuit G) apply 10.5 V to pin 16; 4.5 V to pin 20; 3.0 V to pins 1, 2, 3, 4, 5, 18, and 19; 0.0 V to pins 10 and 15.

21/  For unprogrammed device type 05 (circuit G) apply 10.5 V to pins 17 and 3; 4.5 V to pin 20; 3.0 V to pins 2, 4, 5,

16, 18, and 19; 0.0 V to pins 1, 10, and 15.

22/  For unprogrammed device type 05 (circuit G) apply 10.5 V to pins 3 and 17; 5.5 V to pin 20; 3.0 V to pins 2, 4, 5,

16, 18, and 19; 0.0 V to pins 1, 10, and 15.

23/  At the manufacturer's option, this may be prepared with VIH  = 5.5 and test limits of 50 µA maximum.

24/  At the manufacturer's option, this may be performed with VIO  = 0.5 V and test limits of -1 µA minimum to -250 µA

maximum.

25/  For unprogrammed device type 02 (circuit H) apply 5.0V to pin 24; 0.0V to pins 3, 5, 6, 7, 8, 20, and 21; 3.0V to pins 1, 2, 18, 19, and 23; 9.0V to pin 4.

40

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business