MIL-M-38510-56 Microcircuits, Digital, Cmos, Counters/Dividers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58

MIL-M-38510/56G

TABLE I. Electrical performance characteristics - Continued.

Test	symbol	Conditions 1/ Vss = 0 V, -55°C ≤ TC ≤ 125°C unless otherwise specified	Device type	Limits		Unit
Test	symbol		Device type	Min	Max	Unit
Minimum data pulse width	tPH	VDD = 5.0 V VIH = 5.0 V	03		750	ns
			53		470
			05		450
			55		280
Minimum preset pulse width	tPH	VDD = 5.0 V VIH = 5.0 V	02		750	ns
Minimum preset pulse width	tPH	VDD = 5.0 V VIH = 5.0 V	52		560	ns
Minimum reset pulse width	tPH	VDD = 5.0 V VIH = 5.0 V	01,02		750	ns
			51,52		560
			04,54		560
			05		975
			03		2.7	µs
			53		630	ns
			55		490	ns
Maximum clock frequency	fMAX	VDD = 5.0 V CL = 50 pF	03	650		kHz
			01,02,04	350		kHz
			51	1.43		MHz
			05,53,55	1.10		MHz
			52,54	0.71		MHz

1/ Complete terminal conditions shall be as specified in table III.

2/ Input current at one input node.