MIL-M-38510-121 Microcircuits, Linear Monolithic And Multichip, Silicon 12 Bit Digital-To-Analog ConvertersThis specification covers the detail requirements for monolithic silicon, bipolar, interface, memory core drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52

TABLE III. Group A inspection for device types 01 and 02 - continued.

Subgroup	Symbol	Test no.	Test condition	Measured pin			Equation	Device Types	Limits		Unit
Subgroup	Symbol	Test no.	Test condition	No.	Value	Unit	Equation	Device Types	Min	Max	Unit
8 TA = 125°c	tSLH	265	Vcc = +5 V VEE = -15 V VIN switched from all inputs at logic "0" to all inputs at Logic "1" figure 3	9	t1	∝s	tSLH = t1	01, 02	----	3.0	∝s
	tSHL	266	Vcc = +5 V VEE = -15 V VIN switched from all inputs at logic "1" to all inputs at Logic "0" figure 3	9	t2	∝s	tSHL = t2	01, 02	----	3.0	∝s
	Ri	267	Vcc = +5 V VEE = -15 V Vref = 10 V figure 4	5	I88	mA	Ri = 10/I88	01	15	25	kν
	N02	268	Vcc = +5 V VEE = -15 V VIN = all inputs at logic "1"	9	V12526	mV	N02 = V12526/100	01 02	---- ----	60 100	∝Vrms

1/ Apply +15 Vdc to adapter pin1.

Apply -15 Vdc to adapter pin 2.

connect power supply ground to adapter pins 3 and 5.

1/(01/4096) 410

2/ The power supplies for device types 02 are varied by 5% (i.e. 15 x 0.05 = 0.75).

3/ The calculation of G1 can be found in test no. 132 in this table.