MIL-M-38510-9 Microcircuits, Digital, Bipolar Ttl, Shift Registers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, shift register microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79

MIL-M-38510/9E

NOTES:

1. Unless otherwise specified in the notes with the individual waveforms, all pulse generators shall have the following characteristics: tTLH ≤ 7 ns, tTHL ≤ 7 ns, VIH = 3.0 V minimum, VIL = 0, ZOUT � 50 n.

2. CL = 50 pF minimum, including jig and probe capacitance.

3. All diodes are 1N3064 or equivalent.

4. RL = 400 n ±5%.

NOTES:

1. The clear pulse is a momentary GND, then VIH is applied to the input. tTLH ≤ 15 ns, tTHL ≤ 15 ns, tP(CLEAR) ≤

75 ns.

2. Clock pulse characteristics: tP(CLOCK) = 16 ns, PRR = 24 MHz at -55°C ≤ TC ≤ 125°C (30 MHz at TC = 25°C), VIH = 3.0 V minimum, VIL = GND.

FIGURE 9. Switching test circuits and waveforms for device type 06.