MIL-M-38510/9E
Device type 04
Width of clock input pulse ................................................... 20 ns minimum Width of load input pulse .................................................... 25 ns minimum Clock enable setup time ..................................................... 30 ns minimum Parallel input setup time ..................................................... 10 ns minimum Serial input setup time ........................................................ 35 ns minimum Shift setup time .................................................................. 45 ns minimum Hold time at serial input ...................................................... 0 ns maximum Hold time at parallel input .................................................. 25 ns maximum
Device type 05
Width of clock input pulse ................................................... 20 ns minimum
Width of clear input pulse ................................................... 20 ns minimum Data input setup time ......................................................... 20 ns minimum Clear input setup time ........................................................ 25 ns minimum Hold time at any input ......................................................... 7 ns minimum Mode control setup time .................................................... 30 ns minimum
Device type 06
Width of clock input pulse ................................................... 16 ns minimum Width of clear input pulse ................................................... 12 ns minimum Shift load input setup time .................................................. 32 ns minimum Data input setup time ......................................................... 25 ns minimum Clear input setup time ........................................................ 25 ns minimum Shift load release time ........................................................ 10 ns maximum Data hold time .................................................................... 0 ns minimum
2.0 APPLICABLE DOCUMENT
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business