INCH-POUND MIL-M-38510/108A
18 December 2003
SUPERSEDING
MIL-M-38510/108 (USAF)
9 April 1976
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, TRANSISTOR ARRAYS, MONOLITHIC SILICON
This specification is approved for use by all Departments and Agencies of the Department of Defense.
Inactive for new design as of 10 July 1995
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon transistor arrays. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)
1.2 Part or Identifying Number (PIN). The PIN should be in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types should be as follows: Device type Circuit
01 Two isolated NPN transistors and one NPN Darlington connected pair, general purpose.
02 Three isolated NPN transistors and one NPN differentially connected pair, general purpose.
1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outline should be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style
A |
1/ |
GDFP5-F14 or CDFP6-F14 |
14 |
Flat pack |
C |
GDIP1-T14 or CDIP2-T14 |
14 |
Dual-in-line |
|
D |
GDFP1-F14 or CDFP2-F14 |
14 |
Flat pack |
|
M |
MACY1-X12 |
12 |
Can |
1/ Inactive package case outline.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or emailed to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A FSC 5962
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business