MIL-M-38510-107 Microcircuits, Linear, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for fixed output, monolithic silicon, positive voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78

MIL-M-38510/1070

TABLE I. Electrical performance characteristics for device type 03 - Continued. 4/

Test	Symbol	Conditions -55°C = TA = +125°C see figure 5 and 3.5, unless otherwise specified			Limits		Unit
Test	Symbol	Input voltage	Load current	Other	Min	Max	Unit
Ripple rejection 3/	VIN / VOUT	VIN = 17 V, ei = 1 Vrms, at f = 2,400 Hz	IL = -125 mA	See figure 7, TA = +25°C	55		dB
Output noise 3/ voltage	NO	VIN = 17 V	IL = -50 mA	See figure 8, TA = +25°C		250	∝Vrms
Line transient response	VOUT / VIN	VIN = 17 V, VPULSE = 3.0 V	IL = -5 mA	See figure 9, TA = +25°C		30	mV/V
Load transient response	VOUT / IL	VIN = 17 V	IL = -50 mA, IL = -200 mA	See figure 10, TA = +25°C		2.5	mV/mA
Average temperature coefficient of output voltage	VOUT / T	VIN = 17 V	IL = -5 mA	TA = +125°C and -55°C	-3.0	+3.0	mV/°C

See footnotes at end of table.