MIL-M-38510-107 Microcircuits, Linear, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for fixed output, monolithic silicon, positive voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78

MIL-M-38510/107D

1.3 Absolute maximum ratings.

Input voltage:

Device types 01, 02, 03, 04, 06, 07, and 08 .................................. 35 V dc

Device types 05 and 09 ................................................................. 40 V dc

Lead temperature (soldering, 60 seconds) ....................................... +300°C

Storage temperature range ............................................................... -65°C to +150°C Junction temperature (TJ) ................................................................. +150°C 1/

1.4 Recommended operating conditions.

Input voltage range:

Device types 01 ............................................................................. +7.0 V dc to +25 V dc

Device types 02 and 06 ................................................................. +8.0 V dc to +25 V dc Device types 03 and 07 ................................................................. +15 V dc to +32 V dc Device types 04 and 08 ................................................................. +18.5 V dc to +35 V dc Device types 05 and 09 ................................................................. +28 V dc to +38 V dc

Ambient operating temperature range (TA) ....................................... -55°C to +125°C

1.5 Power and thermal characteristics.

TA = TS	Case	Maximum εJA	Maximum PD without heat sink	Maximum εJC	Maximum PD with heat sink	Maximum εC-S 2/
125°C 3/	x	140°C/W	0.18 W	40°C/W	0.5 W	10°C/W
125°C 3/	y	35°C/W	0.71 W	4°C/W	5.6 W	0.5°C/W
25°C	x	140°C/W	0.89 W	40°C/W	2.50 W	10°C/W
25°C	y	35°C/W	3.60 W	4°C/W	28.00 W	0.5°C/W
-55°C	x	140°C/W	1.50 W	40°C/W	4.00 W	10°C/W
-55°C	y	35°C/W	5.80 W	4°C/W	45.00 W	0.5°C/W

1/ The device is protected by a thermal shutdown circuit which is designed to turn off the output transistor whenever the device junction temperature is in excess of 150°C.

2/ This value represents the maximum allowable thermal impedance of a heat sink to remain within the above thermal ratings.

3/ Based on TJ = 150°C and specified values of εJC and εJA.