MIL-M-38510-71 Microcircuits, Digital, Bipolar, Schottky Ttl, Flip-Flops, Cascadable, Monolithic SiliconThis specification covers the detail requirements for monolithic, silicon, Schottky TTL, bistable logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62

TABLE III. Group A inspection for device type 06 - Continued.

Terminal conditions (pins not designated may be high > 2.0 V, low < 0.8 V, or open).

Subgroup

Symbol

MIL- ST0-883 method

Cases

E, F

Measured terminal

Test limits

Unit

Test no.

CLR

GN0

CLK

VCC

Min

Max

TC = +125°C

tPHL1

Fig. 15

143-150

Same tests and terminal conditions as for subgroup 9, except TC = +125°C and limits are as shown.

2.0

23.0

tPHL3

Fig. 13

151-154

23.0

tPHL2

Fig. 13

155-158

29.0

Same tests, terminal conditions, and limits as for subgroup 10, except TC = -55°C.

11 C = Normal clock pulse.

0 = Momentary connection: 5.0 V to momentary GN0 to 5.0 V occurs before measurement is made.

21 For circuit B, IOS(max) is -110 mA.

31 Only a summary of attributes data is required.

41 Inputs: A = 2.4 V minimum, B = 0.4 V.

51 Outputs: H � 1.5 V, L ≤ 1.5 V.

61 fMAX, minimum limit specified is the frequency of the input pulse. The output frequency shall be one-half of the input frequency.