MIL-M-38510/71D
TABLE I. Electrical performance characteristics - Continued.
Test |
Symbol |
Conditions 1/ -55°C ≤ TC ≤ +125°C |
Device type |
Limits |
Units |
|
Min |
Max |
|||||
Maximum clock frequency |
fMAX |
VCC = 5.0 V; RL = 280 Ω; CL = 50 pF |
06 |
55 5/ |
MHz |
|
Propagation delay time, low-to-high level, clock to Q or Q |
tPLH1 |
2.0 |
17.0 |
ns |
||
Propagation delay time, high-to-low level, clock to Q or Q |
tPHL1 |
2.0 |
23.0 |
ns |
||
Propagation delay time, low-to-high level, clock to Q, clear inactive |
tPLH2 |
2.0 |
17.0 |
ns |
||
Propagation delay time, high-to-low level, clear to Q |
tPHL2 |
2.0 |
29.0 |
ns |
||
Propagation delay time, low-to-high level, clear to Q |
tPLH3 |
2.0 |
20.0 |
ns |
||
Propagation delay time, high-to-low level, clock to Q, clear inactive |
tPHL3 |
2 |
23.0 |
ns |
||
1/ Complete terminal conditions shall be as specified in table III.
2/ At TC = +125°C, VIL = 0.7 V, VOL maximum = 0.45 V.
3/ Not more than one output should be shorted at a time, duration of short circuit not to exceed 5 seconds.
4/ With all outputs open, ICC is measured with the Q and Q outputs high in turn. At the time of the measurement, the clock input is grounded.
5/ With all outputs open and 5.5 applied to all data and clear inputs, ICC is measured after a momentary ground, then 5.5 V is applied to clock.
6/ fMAX, minimum limit specified is the frequency of the input pulse. The output frequency shall be one-half of the input frequency.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business