TABLE III. Group A inspection for device type 05 - Continued.
Terminal conditions (pins not designated may be high > 2.0 V, low < 0.8 V, or open).
Subgroup |
Symbol |
MIL- STD-883 method |
Cases X, 2 1/ |
2 |
3 |
4 |
5 |
7 |
8 |
9 |
10 |
12 |
13 |
14 |
15 |
17 |
18 |
19 |
20 |
Measured terminal |
Test limits |
Unit |
|
Cases E, F |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
|||||||
Test no. |
CLR |
Q1 |
D1 |
D2 |
Q2 |
D3 |
Q3 |
GND |
CLK |
Q4 |
D4 |
Q5 |
D5 |
D6 |
Q6 |
VCC |
Min |
Max |
|||||
9 TC = +25°C |
tPHL1 |
Fig. 15 " " " " " |
89 90 91 92 93 94 |
2.7 V " " " " " |
OUT |
IN (D) |
IN (D) |
OUT |
IN (D) |
OUT |
GND " " " " " |
IN (C) " " " " " |
OUT |
IN (D) |
OUT |
IN (D) |
IN (D) |
OUT |
5.0 V " " " " " |
CLK to Q1 CLK to Q2 CLK to Q3 CLK to Q4 CLK to Q5 CLK to Q6 |
2.0 " " " " " |
19.0 " " " " " |
ns " " " " " |
tPHL2 |
Fig. 13 " " " " " |
95 96 97 98 99 100 |
IN (F) " " " " " |
OUT |
2.7 V |
2.7 V |
OUT |
2.7 V |
OUT |
" " " " " " |
IN (G) " " " " " |
OUT |
2.7 V |
OUT |
2.7 V |
2.7 V |
OUT |
" " " " " " |
CLR to Q1 CLR to Q2 CLR to Q3 CLR to Q4 CLR to Q5 CLR to Q6 |
" " " " " " |
24.0 " " " " " |
" " " " " " |
|
10 TC= +125°C |
fMAX 7/ |
101-106 |
Same tests and terminal conditions as for subgroup 9, except TC = +125°C and limits are as shown. |
55 |
MHz |
||||||||||||||||||
tPLH1 |
107-112 |
2.0 |
17.0 |
ns |
|||||||||||||||||||
tPLH2 |
113-118 |
" |
17.0 |
" |
|||||||||||||||||||
tPHL1 |
119-124 |
" |
23.0 |
" |
|||||||||||||||||||
tPHL2 |
125-130 |
" |
29.0 |
" |
|||||||||||||||||||
11 |
Same tests, terminal conditions, and limits as for subgroup 10, except TC = -55°C. |
||||||||||||||||||||||
1/ Cases X and 2 terminals not designated are NC.
2/ C = Normal clock pulse.
D = Momentary connection: 5.0 V to momentary GND to 5.0 V, occurs before measurement is made.
3/ At the manufacturers' option, IOS tests 45 through 50, the following alternate procedure may be used: Apply 2.75 V at test 45 Q1, test 46 Q2, test 47 Q3, test 48 Q4, test 49 Q5, and test 50 Q6, using min/max limits of -20/-50 mA.
4/ Only a summary of attributes data is required.
5/ Inputs: A = 2.4 V minimum, B = 0.4 V.
6/ Outputs: H � 1.5 V, L ≤ 1.5 V.
7/ fMAX, minimum limit specified is the frequency of the input pulse. The output frequency shall be one-half of the input frequency.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business