MIL-M-38510-502 Microcircuits, Digital, Bipolar Field Programmable Logic Array Fpla 16 X 48 X 8, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, bipolar, field programmable logic array FPLA microcircuits which employ thin film nichrome resistors WICr as the fusible link or programming element. Three product assurance classes and a choice of case outline/lead material and finish are provided for each type and are reflected in the complete part number.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33

INCH POUND

MIL-M-38510/502A

21 November 2005

SUPERSEDING

MIL-M-38510/502 (USAF)

16 June 1981

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, BIPOLAR FIELD PROGRAMMABLE LOGIC ARRAY (FPLA) 16 x 48 x 8, MONOLITHIC SILICON

Inactive for new design after 28 July 1995.

This specification is approved for use by all Departments and  Agencies  of the  Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, bipolar, field programmable logic array (FPLA) microcircuits which employ thin film nichrome resistors (NICr) as the fusible link or programming element.  Three product assurance classes and a choice of case outline / lead material and finish are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device type.  The device types are as follows:

Device type                                                   Circuit

01                                                 16 x 48 x 8 logic array with uncommitted collector

02        16 x 48 x 8 logic array with active pull-up and a third high-impedance state output.

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outline is as designated in MIL-STD-1835 and as follows:

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to memory@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                           FSC 5962