MIL-M-38510-175 Microcircuits, Digital, Cmos, Positive Logic, Flip-Flops And Monostable Multivibrator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71

MIL-M-38510/175C

9/ Connect RX1, CX1, RX2, and CX2 using the values in the table below:

Test	RX1, 2	CX1, 2
Test	Kν ± 10%	pF ± 10%
tPLH1	10	100
tPHL1	10	100
tPLH2 *	10	100
tPHL2 *	10	100
tTLH1	10	100
tTHL1	10	100
tTHL2	10	0.01 ∝F
tTHL2	10	0.1 ∝F
tTHL2	10	1.0 ∝F
tTLH2	10	0.01 ∝F
tTLH2	10	0.1 ∝F
tTLH2	10	1.0 ∝F

* Reset pulse shall be applied before the RXCX times out.

10/ The following terminal conditions shall apply. The tests shall be performed using the logical timing sequence of test numbers 86 through 109. The parenthetical terminal conditions are used for the "truth table test". The nonparenthetical terminal conditions are used for the "VIH1, 2, 3/VIL1, 2, 3" tests. The RX1, RX2 terminal conditions are for both of these tests.

Input/output conditions

VDD	Input levels		Output levels		RX1, RX2 Input levels
	H	L	H	L	H	L
(= 5.0 V) 5.0 V	Max	Min 1.5V (VSS)	Min (VDD - 0.5 V) 4.5V	Max (VSS = 0.8 V) 0.5V	VDD Through 22 kν ±10%	VSS Through 22 kν ±10%
	(VDD) 3.5 V
10.0V		3.0V	9.0V	1.0V
	7.0V
15.0V ( 18.0 V)		4.0V (VSS)	13.5V (VDD - 0.5 V)	1.5V (VSS + 0.5 V)
	(VDD) 11.0V