MIL-M-38510-175 Microcircuits, Digital, Cmos, Positive Logic, Flip-Flops And Monostable Multivibrator, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71

MIL-M-38510/175C

NOTES:

1. Pulse generator number 1 has the following characteristics:

VGEN = VDD ±1%, tPH = 1.0 ±0.1 μs, tr and tf = 20 ±2 ns and PRR = 200 kHz.

2. Pulse generators number 2 have the following characteristics:

VGEN = VDD ±1%, tPH = 1.0 ±0.1 μs, tr and tf = 20 ±2 ns and PRR = 100 kHz.

3. Requirements for minimum clock frequency (fCL), tr, tf, tSHL, tSLH, tp(CL), and tp(R) are

established by setting the parameter to the limits given in table III and observing proper output state change.

4. Complete terminal conditions are as specified in table III.

5. For the tPLZ and tPZL measurements, the output is tied to VDD through a 1 kν resistor.

6. For the tPHZ and tPZH measurements, the output is tied to VSS through a 1 kν resistor.

FIGURE 4. Switching waveforms and test circuit.