MIL-M-385101654A
Line no. |
MIL-PRF-38535 test requirements |
Class S device 11 |
Class B device 11 |
||||
Ref. par. |
Table III Subgroups 21 |
Table IV delta limits 31 |
Ref. par. |
Table III subgroups 21 |
Table IV delta 31 |
||
1 |
Interim electrical parameters |
1 |
1 |
||||
2 |
Static burn-in I (method 1015) |
4.2c 4.5.2 |
Req'd |
Not req'd |
|||
3 |
Same as line 1 |
*1 |
� |
||||
4 |
Static burn-in II (method 1015) |
4.2c 4.5.2 |
Req'd |
4.2c 4.5.2 |
req'd 41 |
||
5 |
Same as line 1 |
4.2e |
*1 |
� |
4.2e |
1* |
� |
6 |
Dynamic burn-in (method 1015) |
4.2c 4.5.2 |
Req'd |
Not req'd |
|||
7 |
Same as line 1 |
4.2e |
1 |
� |
|||
8 |
Final electrical parameters |
* 1, 2, 3, 7, 8, 9 |
1*, 2, 7, 9 41 |
||||
9 |
Group A test requirements |
4.4.1 |
1, 2, 3, 4, 7, 8, 9, 10, 11 |
4.4.1 |
1, 2, 3, 4, 7, 8, 9, 10, 11 |
||
10 |
Group B test when using method 5005 QCI option |
4.4.2 |
1, 2, 3, 9, 10, 11 |
� |
|||
11 |
Group C end-point electrical parameters |
4.4.2 |
1, 2, 3, 9, 10, 11 |
� |
4.4.3 |
1, 2 |
� |
12 |
Group D end-point electrical parameters |
4.4.4 |
1, 2, 3 |
4.4.4 |
1, 2 |
||
11 Blank spaces indicate tests are not applicable.
21 * indicates PDA applies to subgroup 1 (see 4.2.1).
31 � indicates delta limits shall be required only on table III subgroup 1, where specified, and the delta values shall be computed with reference to the previous interim electrical parameters.
41 The device manufacturer may, at his option, either complete subgroup 1 electrical parameter measurements, including delta measurements, within 96 hours after burn-in completion (removal of bias); or may complete subgroup 1 electrical measurements without delta measurements within 24 hours after burn-in completion (removal of bias).
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business