MIL-M-38510-654 Microcircuits, Digital, High Speed, Cmos Latches, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64

INCH-POUND MIL-M-38510/654A

9 May 2006

SUPERSEDING MIL-M-38510/654

19 December 1986

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, HIGH-SPEED CMOS, LATCHES, MONOLITHIC SILICON

Reactivated after 9 May 2006 and may be used for new and existing designs and acquisitions.

This specification is approved for use by all Departments and  Agencies  of the Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN).  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2  Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                              Circuit

01                                       Quad bistable transparent latch

02                                       8-bit addressable latch

03                                       Octal D type transparent latch with three-state outputs

04                                       Octal transparent latch, three-state, inverting

05                                       Octal transparent latch, three-state, inverting

06                                       Octal transparent latch, three-state

53                                       Octal D-type transparent latch with three-state outputs and

TTL compatible inputs

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows:

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAC, P.O. Box 3990, Columbus, OH 43218-3990, or email CMOS@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.

AMSC N/A                                                                                                                                                     FSC 5962