MIL-M-38510-654 Microcircuits, Digital, High Speed, Cmos Latches, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64

MIL-M-38510/654A

TABLE I. Electrical performance characteristics - Continued.

Test	Symbol	Conditions 1/ TC = +125°C unless otherwise specified	Device type	VCC	Limits		Unit
Test	Symbol	Conditions 1/ TC = +125°C unless otherwise specified	Device type	VCC	Min	Max	Unit
Propagation delay time, clear to outputs	tPHL4 6/, 7/	CL = 50 pF ± 10%	02	4.5 V	5	36	ns
Output enable time	tPZH, tPZL 6/, 7/	CL = 50 pF ± 10% RL = 1k0 ± 10%	03		5	35
			04		5	35
			05,06		4	35
			53		5	41
Output disable time	tPHZ, tPLZ 6/, 7/		03		5	35
			04		5	35
			05,06		3	35
			53		5	41
Transition delay time	tTHL, tTLH 6/, 7/	CL = 50 pF ± 10%	01		3	20
			02		3	20
			03,04, 53		2	16
			05		2	16
			06		2	16

1/ Complete terminal conditions shall be as specified in table III.

2/ Guaranteed but not tested.

3/ ICC + ICC� = Total supply current.

4/ Power dissipation capacitance (CPD) per latch.

5/ IOZL: Set output to high state.

IOZH: Set output to low state.

6/ Tested at VCC = 4.5 V at 125°C for sample testing and at VCC = 4.5 V at 25°C for screening. Guaranteed at other VCC voltages and temperatures. See table IA and the exception in 4.4.1d.

7/ For propagation and transition delay times at VCC = 2.0 V, increase limit by a factor of 5. For propagation and transition delay times at VCC = 6.0 V, decrease limit by a factor of .85.

TABLE IA. Calculated dynamic values at -55°C /+25°C case temperature.

VCC

TC = °C

+125

-55/+25

2.0 V

4.5 V

6.0 V

1→

↓

0.85

5 x 0.75

→0.75

↓

0.85 x 0.75

NOTE: Normalized numbers (+125°C = 1).

The 2.0 V and 6.0 V numbers are derived

from their 4.5 V integer value (rounding off according 5/4).