MIL-M-38510-2 Microcircuits, Digital, Ttl, Flip-Flops, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, TTL, bistable logic microcircuits. Three product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65

NOTES:

A = Normal clock pulse.

B = Momentary GND, then 4.5 V. C = This note has been deleted.

E = Momentary ground, then 2.4 V. F = Momentary ground, then 5.5 V.

** = Test time limit s 100 ms.

J = This note has been deleted.

1/ Terminal conditions (pins not designated may be H � 2.0 V, or L s 0.8 V, or open.)

2/ Input voltages shown are:  A = 2.0 V minimum and B = 0.8 V maximum.

3/ Output voltages shall be either: (a) H = 2.4 V, minimum and L = 0.4 V, maximum when using a high speed checker double comparator; or (b) H � 1.5 V and L < 1.5 V when using a high speed checker single comparator.

4/ Tests shall be performed in sequence.

5 FMAX, minimum limit specified is the frequency of the input pulse.  The output frequency shall be one-half of the input frequency.