MILITARY SPECIFICATION
INCH-POUND MIL-M-38510/2G
8 February 2005
SUPERSEDING MIL-M-38510/2E
24 December 1974
MIL-M-0038510/2F (USAF)
24 OCTOBER 1975
MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC SILICON
Inactive for new design after 7 September 1995
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, TTL, bistable logic microcircuits. Three product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type Circuit
01 Single J-K master-slave flip-flop
02 Dual J-K master-slave flip-flop, no preset
03 Dual J-K master-slave flip-flop, no preset
04 Dual J-K master-slave flip-flop
05 Dual D-type edge-triggered flip-flop
06 Single edge-triggered J-K flip-flop
07 Dual D-type edge-triggered flip-flop, buffered output
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43218-3990, or emailed to bipolar@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business