MIL-M-38510-117 Microcircuits, Linear, Adjustable, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60

MIL-M-38510/11?C

TABLE IV. Group C end point electrical parameters. (TA = +25°C)

Device type	Characteristic	Symbol	Delta limits 1/	Limits		Units
Device type	Characteristic	Symbol	Delta limits 1/	Min	Max	Units
01, 02	Output voltage	VOUT 2/	±50 mV	4.?5	5.25	V
01, 02	Standby current drain	ISCD	±20 %	-8.0	-0.5	mA
03, 04, 05	Output voltage	VOUT 2/	±10 mV	1.20	1.30	V
06	Output voltage	VOUT 2/	±10 mV	1.19	1.29	V
03, 04, 05, 06	Adjust pin current	IADJ 3/	±10 µA	-100	-15	µA
03, 04	Line regulation	VRLINE	±4 mV	-9	9	mV
05, 06	Line regulation	VRLINE	±2 mV	-4	4	mV

1/ Delta limits apply to the measured value (see delta limit definition in MIL-PRF-38535).

2/ Delta limits apply to test number 3 for all device types.

3/ Delta limits apply to test number 11 for all device types 03, 04, 05 and test number 12 for device type 06.

5. PACKAGING

5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity within the Military Service or Defense Agency, or within the military service's system command. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.