MIL-M-38510-117 Microcircuits, Linear, Adjustable, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60

INCH-POUND MIL-M-38510/117C

11 August 2005

SUPERSEDING MIL-M-38510/117B

10 February 2004

MILITARy SPECIFICATION

MICROCIRCUITS, LINEAR, ADJUSTABLE, POSITIVE, VOLTAGE REGULATORS, MONOLITHIC SILICON

This specification is approved for use by all Departments and Agencies of the Department of Defense. Reactivated for new design as of 10 February 2004.  May be used for either new or existing design acquisition.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators.  Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.2  Part or Identifying Number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as shown in the following:

Device type                                                  Circuit                                                Case outline letter

01                                    4-terminal voltage regulator,                                               x

5 volts s VO s 30 volts at 0.5 A

02                                    4-terminal voltage regulator,                                               y

5 volts s VO s 30 volts at 1.5 A

03                                    3-terminal voltage regulator,                                               x

1.25 volts s VO s 37 volts at 0.5 A

04                                    3-terminal voltage regulator,                                               y

1.25 volts s VO s 37 volts at 1.5 A

05                                    3-terminal voltage regulator,                                               y

1.25 volts s VO s 37 volts at 3.0 A

06                                    3-terminal voltage regulator,                                               y

1.25 volts s VO s 37 volts at 5.0 A

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to linear@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                                          FSC 5962