For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-M-38510-117 Microcircuits, Linear, Adjustable, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60


MIL-M-38510/11?C


Device table

Device types

01

02

03

04

05

06

vIN

10 v

10 v

6.25 v

6.25 v

6.25 v

6.25 v

RL

40.2 n

14.3 n

10 n

2.5 n

2.5 n

2.5 n

Ci

0.33 µF

0.33 µF

1.0 µF

1.0 µF

1.0 µF

1.0 µF

CL

0.1 µF

0.1 µF

1.0 µF

1.0 µF

1.0 µF

1.0 µF


NOTES:

1.    ei = 1 vrms at f = 2400 Hz (measured at the input terminals of the DUT).

Ripple rejection = 20 log (eirms / eorms).

2.    The control pin connection is required for device types 01 and 02 only.

3.    The input 50 n resistor and RL shall be type RER ?0 or equivalent.

4.    The meter for ei and eo shall have a minimum bandwidth from 10 Hz to 10 kHz for devices 01 - 05 and

300 Hz to 10 kHz for device type 06 shall measure true rms voltages.


FIGURE 11.  Ripple rejection test circuit.


35




For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.