MIL-M-38510-117 Microcircuits, Linear, Adjustable, Positive, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for three and four terminal monolithic silicon, adjustable, positive, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60

MIL-M-38510/11?C

TABLE I. Electrical performance characteristics - Continued.

Test	8ymbol	Conditions 1/ 2/ -55°C ≤ TA ≤ +125°C see figure 9 and 3.5 unless otherwise specified		Device type	Limits		Unit
					Min	Max
		Input voltage	Load current		Min	Max
Adjust pin current change versus load current	�IADJ (LOAD)	VIN = 6.25 V	-500 mA ≤ IL ≤ -5 mA	03	-5	5	µA
Minimum load current	IQ	4.25 V ≤ VIN ≤ 14.25 V, forced VOUT = 1.4 V		03	-3.00	-0.05	mA
Minimum load current	IQ	VIN = 41.25 V forced VOUT = 1.4 V		03	-5.00	-0.2	mA
Output short circuit current	IO81	VIN = 4.25 V		03	-1.8	-0.50	A
Output short circuit current	IO82	VIN = 40 V		03	-0.50	-0.05	A
Output voltage recovery after output short circuit current	VOUT (RECOV)	VIN = 4.25 V, 3/ after IO81	RL = 2.5 n, CL = 20 µF	03	1.20	1.30	V
Output voltage recovery after output short circuit current	VOUT (RECOV)	VIN = 40 V, 3/ after IO82	RL = 250 n	03	1.20	1.30	V
Voltage start-up	V8TART	VIN = 4.25 V	RL = 2.5 n, CL = 20 µF	03	1.20	1.30	V
Ripple rejection	�VIN / �VOUT	VIN = 6.25 V, 4/ ei = 1 Vrms, at f = 2400 Hz	IL = -125 mA, TA = 25°C, see figure 11	03	65		dB
Output noise voltage	VNO	VIN = 6.25 V, 4/ see figure 12	IL = -50 mA, TA = 25°C	03		120	µVrms
Line transient response	�VOUT / �VIN	VIN = 6.25 V, 5/ �VIN = 3.0 V, see figure 13	IL = -10 mA, TA = 25°C	03		6	mV/V
Load transient response	�VOUT / �IL	VIN = 6.25 V, 5/ see figure 14	IL = -50 mA, �IL = -200 mA TA = 25°C	03		0.60	mV/mA

8ee footnotes at end of table.