MIL-M-38510-115 Microcircuits, Linear, Negative, Voltage Regulators, Monolithic SiliconThis specification covers the detail requirements for fixed output, monolithic silicon, negative, voltage regulators. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67

MIL-M-38510I115B

TABLE III. Group A inspection for all device type 06 - Continued.

Subgroup	Symbol	Test no.	Conditions see figure 5, unless otherwise specified		Limits		Unit	Notes
			Conditions see figure 5, unless otherwise specified		Min	Max
			Input voltage	Load current	Min	Max
5 TA = 125°C	VIN I VOUT	58	VIN = -17 V, ei = 1 V rms at f = 2400 Hz	IL = 350 mA	50		dB	See figure 7, meter BW 10 Hz to 10 kHz
6 TA = -55°C	VIN I VOUT	59	VIN = -17 V, ei = 1 V rms at f = 2400 Hz	IL = 350 mA	50		dB	See figure 7, meter BW 10 Hz to 10 kHz
7 TA = 25°C	VNO	60	VIN = -17 V	IL = 0.1 A		600	∝V rms	See figure 8
	VOUT I VIN	61	VIN = -17 V, VPULSE = -3.0 V	IL = 5 mA		30	mVIV	See figure 9
	VOUT I IL	62	VIN = -17 V	IL = 100 mA IL = 400 mA		2.5	mVImA	See figure 10