MIL-M-38510-757 Microcircuits, Digital, Advanced Cmos, Buffer Gates, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27

INCH-POUND

MIL-M-38510/757C

14 November 2003

SUPERSEDING MIL-M-38510/757B

14 March 2003

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, ADVANCED CMOS, BUFFER GATES, MONOLITHIC SILICON, POSITIVE LOGIC

Reactivated after 14 Nov. 2003 and may be used for new and existing designs and acquisitions.

This specification is approved for use by all Departments and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance (RHA) are provided and are reflected in the complete Part or Identifying Number (PIN). For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2 Part or identifying number (PIN). The PIN should be in accordance with MIL-PRF-38535 and as specified herein.

1.2.1 Device types. The device types should be as follows:

Device type		Circuit
01		Hex inverter
02		Hex inverter Schmitt trigger
03		Octal buffer/line driver with three-state outputs
04		Octal buffer/line driver with three-state outputs
05		Octal buffer/line driver with three-state outputs
06	1/
07	1/
08	1/
09	1/
10		Octal inverting bus driver with three-state outputs
11		Octal noninverting bus driver with three-state outputs

1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535.

1/ Devices 06 - 09 were intended to be added in the future, see 6.7.

Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAC, 3990 East Broad St., Columbus, OH 43216-5000, or email to cmos@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A FSC 5962