1.3 Absolute maximum ratings.
MIL-M-38510/507B
Supply voltage range ...................................................... -0.5 V dc to +7.0 V dc Input voltage range ........................................................ -3.0 V dc to +7.0 V dc Storage temperature range ............................................ -65°C to +150°C
Lead temperature (soldering, 10 seconds) ..................... +260°C
Thermal resistance, junction-to-case ( θ JC) 1/.............. (See MIL-STD-1835) Output voltage applied in high Z state ............................ -0.5 V dc to +7.0 V dc Output sink current .......................................................... 16 mA
Maximum power dissipation (PD) ................................ 1.2 W Maximum junction temperature (TJ) ................................ +175°C
Data retention.................................................................. 10 years minimum
1.4 Recommended operating conditions.
Supply voltage range....................................................... 4.5 V dc minimum to 5.5 V dc maximum
Minimum high level input voltage (VIH) ........................... 2.0 V dc
Maximum low level input voltage (VIL) ............................. 0.8 V dc
Case operating temperature range (TC ) ......................... -55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard for Microelectronics.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, (except for associated detail specification sheets or MS standards), the text of this specification takes precedence. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by a manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract award (see 4.2 and 6.3). When manufacturer programmed devices are delivered to the user, an altered item drawing shall be prepared by the contracting activity to specify the required program configuration.
1/ Must withstand the added PD due to short circuit condition ( e.g., IOS).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business