MIL-M-38510-111 Microcircuits, Analog Switch With Driver, Monolithic And Multi-Chip SiliconThis specification covers the detail requirements for silicon, break-before-make, monolithic and multi-chip analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54

MIL-M-38510/111A

3. For device types 01, 03, 05, and 07:

a. Vsource = +7.5 V for Ton. b. Vsource = -7.5 V for Toff.

For device types 02, 04, 06, and 08:

a. Vsource = +10.0 V for Ton. b. Vsource = -10.0 V for Toff.

4. Driver input 1 shall be used to test all switches for device types 03 and 04, switch 1 for device types 05 and

06 and switches 1 and 2 for device types 07 and 08. Driver input 2 shall be used to test all switches for

device types 01 and 02, switch 2 for device types 05 and 06 and switches 3 and 4 for device types 07 and 08.

FIGURE 5. Input-output waveforms for time delay tests - Continued.