MIL-M-38510-111 Microcircuits, Analog Switch With Driver, Monolithic And Multi-Chip SiliconThis specification covers the detail requirements for silicon, break-before-make, monolithic and multi-chip analog switches with drivers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54

INCH-POUND MIL-M-38510/111A

10 December 2003

SUPERSEDING MIL-M-38510/111

3 January 1979

MILITARY SPECIFICATION

MICROCIRCUITS, ANALOG SWITCH WITH DRIVER, MONOLITHIC AND MULTI-CHIP SILICON This specification is approved for use by all Departments and Agencies of the Department of Defense.

Reactivated for new design as of 10 December 2003.  May be used for either new or existing design acquisition

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for silicon, break-before-make, monolithic and multi- chip analog switches with drivers.  Two product assurance classes and a choice of case outlines and lead finishes

are provided and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3)

1.2  Part number.  The part number should be in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types should be as follows: Device type                                                   Circuit

01                                    Dual channel, 30 ν, SPST switches

02                                    Dual channel, 75 ν, SPST switches

03                                    Dual channel, 30 ν, DPST switches

04                                    Dual channel, 75 ν, DPST switches

05                                    Single channel, 30 ν, SPDT switch

06                                    Single channel, 75 ν, SPDT switch

07                                    Dual channel, 30 ν, SPDT switches

08                                    Dual channel, 75 ν, SPDT switches

NOTE:  A channel is defined as a driver with associated switches.

1.2.2  Device class.  The device class should be the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outline.  The case outline should be as designated in MIL-STD-1835 and as follows: Outline letter          Descriptive designator                  Terminals                    Package style

1/  Inactive package case outline.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or email bipolar@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.

AMSC N/A                                                                                                                                           FSC 5962