INCH-POUND MIL-M-38510/141B
12 July 2004
SUPERSEDING MIL-M-38510/141A
04 May 1988
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, DARLINGTON TRANSISTOR ARRAY, SEVEN AND EIGHT GATE, MONOLITHIC SILICON
Reactivated after July 12, 2004 and may be used for either new or existing design acquisition.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, seven and eight gate, Darlington transistor array microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-
38510 have been superseded by MIL-PRF-38535, (see 6.3)
1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2 Part number. The part number should be in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device types Circuit
01, 02, 03, 04, 05 Darlington transistor array, seven gate
06, 07, 08, 09, 10 Darlington transistor array, eight gate
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
E |
GDIP1-T16 or CDIP2-T16 |
16 |
Dual in line |
V |
GDIP1-T18 or CDIP2-T18 |
18 |
Dual in line |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43216-5000, or email linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at www.dodssp.daps.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business