MIL-M-38510-140 Microcircuits, Linear, Monolithic And Hybrid Silicon, Microprocessor Compatible, 12 Bit Analog-To-Digital ConvertersThis specification covers the detail requirements for monolithic and hybrid, microprocessor compatible, 12-bit successive approximation analog-to-digital converters buffered outputs. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55

MIL-M-38510/140A

TABLE IV. Group C end point electrical parameters.

Table III test no.	Device type	Symbol	Delta 1/		End-point limits
Table III test no.	Device type	Symbol	Min	Max	Min	Max	Units
382	01,02	VIO	-0.5	0.5	-1.0	2.0	LSB
382	03,04,05,06	VIO	-0.5	0.5	-2.0	3.0	LSB
383	All	BZ	-1.0	1.0	-5.5	4.5	LSB
384	01	AE	-0.1	0.1	-0.225	0.225	%FSR
	02	AE	-0.1	0.1	-0.35	0.35	%FSR
	03,04,05,06	AE	-0.1	0.1	-0.4	0.4	%FSR

1/ Delta limits apply to the measured value (see delta limit definition in MIL-PRF-38535).

5. PACKAGING

5.1 Packaging requirements. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity within the Military Department of Defense Agency, or within the Military Department's System Command. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

6. NOTES

6.1 Intended use. Microcircuits conforming to this specification are intended for original equipment design applications and logistic support of existing equipment.

6.2 Acquisition requirements. Acquisition documents should specify the following:

a. Title, number, and date of the specification.

b. PIN and compliance identifier, if applicable (see 1.2).

c. Requirements for delivery of one copy of the conformance inspection data pertinent to the device inspection lot to be supplied with each shipment by the device manufacturer, if applicable.

d. Requirements for certificate of compliance, if applicable.

e. Requirements for notification of change of product or process to acquiring activity in addition to notification of the qualifying activity, if applicable.

f. Requirements for failure analysis (including required test condition of MIL-STD-883, method 5003), corrective action and reporting of results, if applicable.

g. Requirements for product assurance options.

h. Requirements for special carriers, lead lengths, or lead forming, if applicable. These requirements should not affect the part number. Unless otherwise specified, these requirements will not apply to direct purchase by

or direct shipment to the Government.

i. Requirements for "JAN" marking.

j. Packaging requirements (see 5.1).