MIL-M-38510-135 Microcircuits, Linear, Low Offset Operational Amplifiers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low offset operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30

MIL-M-38510/135G

NOTES:

1. Resistors are ±1.0% tolerance and capacitors are ±10% tolerance.

2. This capacitance includes the actual measured value with stray and wire capacitance.

3. Precautions shall be taken to prevent damage to the OUT during insertion into socket and in applying power.

4. Pulse input and output characteristics are shown on the next space.

5. Compensation capacitors should be added as required for test circuit stability. Proper wiring procedures shall be followed to prevent unwanted coupling and oscillations. Loop response and settling time shall

be consistent with the test rate such that any value has settled for at least five loop time constants before the value is measured.

6. For device type 05 only.

FIGURE 5. Test circuit for slew rate.