MIL-M-38510-135 Microcircuits, Linear, Low Offset Operational Amplifiers, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, low offset operational amplifiers. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30

MIL-M-38510/135G

1.3 Absolute maximum ratings.

Supply voltage (VCC) ....................................................................... ±22 V Input voltage (VIN) ........................................................................... ±VCC

Differential input voltage range:

Device types 01 and 02 ................................................................ ±30 V Device types 03, 04, 05, and 06 ................................................... ±0.7 V 1/

Output short-circuit duration ............................................................. 2/

Lead temperature (soldering, 60 seconds) ...................................... +300°C

Storage temperature range .............................................................. -65°C to +150°C Junction temperature (TJ) ................................................................ +175°C 3/ Maximum power dissipation (PD) ..................................................... 500 mW 4/

1.4 Recommended operating conditions.

Supply voltage range (VCC):

Device types 01 and 02 ................................................................ ±4.5 V dc to ±20.0 V Device types 03, 04, 05, and 06 ................................................... ±4.5 V dc to ±18.0 V

Ambient operating temperature range (TA) ...................................... -55°C to +125°C

1.5 Power and thermal characteristics.

Case outlines	Maximum allowable power dissipation	Maximum eJC	Maximum eJA
C	400 mW at TA = +125°C	28°C/W	120°C/W
G	330 mW at TA = +125°C	60°C/W	150°C/W
P	400 mW at TA = +125°C	28°C/W	120°C/W
2	400 mW at TA = +125°C	20°C/W	120°C/W

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

1/ If the differential input voltage exceeds ±0.7 V, the input current should be limited to ±10 mA.

2/ Output may be shorted to ground indefinitely at VS = ±15 volts, TA = 25°C. Temperature and supply voltages shall be limited to ensure dissipation rating is not exceeded.

3/ For short term test (in the specific burn-in and steady-state life test configuration when required and up to

168 hours maximum), TJ = 175°C.

4/ Maximum power dissipation versus ambient temperature.