MIL-M-38510-133 Microcircuits, Linear, 10-Bit Digital-To-Analog Converter, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, 10-bit binary digital-to-analog converters containing deposited thin film resistor networks. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-M-38510/133B

6.5  Abbreviations, symbols, and definitions.  The abbreviations, symbols, and definitions used herein are defined in

MIL-PRF-38535, MIL-HDBK-1331, and as follows:.

DLE        ................................................   Differential linearity error is the difference between the actual separation of two adjacent output levels and the ideal separation of two adjacent output levels.  It is generally expressed in LSB (i.e. 1 LSB).

MCE   .................................................   The major carry error is the differential linearity error between the output levels corresponding to the digital code word defined by turning one bit on and all other bits off and the preceding adjacent digital code word.

It is expressed in LSB. CMOS.................................................   Complementary metal oxide semiconductor. VCC        .................................................   Positive supply voltage (usually +15 V).

VEE        .................................................   Negative supply voltage (usually -15 V). GND   .................................................   Ground zero growth potential.

VIL          .................................................   Digital low state input voltage. VIH         .................................................   Digital high state input voltage. MSB   .................................................   Most significant digital input bit. BIT1   .................................................   Same as MSB = full-scale/2.

BIT2   .................................................   Second most significant bit = full-scale/4. LSB    .................................................   Least significant bit = full-scale/2 expN. BITN   .................................................   Same as LSB for an N-bit converter.

IOUT       .................................................   Sum of all R-2R ladder currents going through VIH command switches. RF      ..........................................................................    Feedback resistor for an external op amp.

ICC          .................................................   Current supplied to the VCC  terminal of the DUT for a given supply voltage (usually

+15 V).

IEE          .................................................   Current supplied to the VEE  terminal of the DUT for a given supply voltage (usually

-15 V).

6.6  Logistic support.  Lead materials and finishes (see 3.4) are interchangeable.  Unless otherwise specified, microcircuits acquired for Government logistic support will be acquired to device class B (see 1.2.2), lead material and finish A (see 3.4). Longer length leads and lead forming should not affect the part number.

6.7  Substitutability.  The cross-reference information below is presented for the convenience of users.  Microcircuits covered by this specification will functionally replace the listed generic-industry type.  Generic-industry microcircuit types may not have equivalent operational performance characteristics across military temperature ranges or reliability factors equivalent to MIL-M-

38510 device types and may have slight physical variations in relation to case size.  The presence of this information should not be deemed as permitting substitution of generic-industry types for MIL-M-38510 types or as a waiver of any of the provisions of MIL-PRF-38535.

      Military device type                                                             Generic-industry type        

01                                                                                         561

6.8  Changes from previous issue.  Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.

Custodians:                                                                    Preparing activity: Army - CR                                                                    DLA - CC

Navy - EC

Air Force - 11

NASA - NA DLA - CC

Review activities: Army - MI, SM

Navy - AS, CG, MC, SH, TD

Air Force - 03, 19, 99

Project  5962-2046

NOTE:  The activities listed above were interested in this document as of the date of this document.  Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil .

23