INCH-POUND MIL-M-38510/1258
11 August 2005
SUPERSEDING MIL-M-38510/125A
15 October 2003
MILITARY SPECIFICATION
MICROCIRCUITS, LINEAR, SAMPLE AND HOLD CIRCUITS, MONOLITHIC SILICON Reactivated for new design as of 15 October 2003. May be used for either new or existing design acquisition.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.
1. SCOPE
1.1 Scope. This specification covers the detail requirements for monolithic silicon, sample and hold circuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-
38535, (see 6.4)
1.2 Part or identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein.
1.2.1 Device types. The device types are as follows:
Device type Circuit
01 Sample and hold circuits, 10 kn load
02 Sample and hold circuits, 2 kn load
1.2.2 Device class. The device class is the product assurance level as defined in MIL-PRF-38535.
1.2.3 Case outline. The case outline is as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
G |
MACY1-X8 |
8 |
Can |
P |
GDIP1-T8 or CDIP2-T8 |
8 |
Dual-in-line |
Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East 8road St., Columbus, OH 43218-3990, or emailed to linear@dscc.dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A FSC 5962
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business