MIL-HDBK-780 Standard Microcircuit DrawingsThis handbook provides guidance and information concerning standard microcircuit drawings SMDs. System applications are subject to the approval of the applicable program office. This handbook is for guidance only and cannot be cited as a requirement.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47

MIL-HDBK-780D

w/CHANGE 1

FOREWORD

1.  This handbook is approved for use by all Departments and Agencies of the Department of Defense.

2.  This handbook provides guidance on standard microcircuit drawings (SMD's).  The purpose of the SMD program is to minimize the proliferation of specification and source control drawings within the Department of Defense (DoD). The use of one SMD for an item of supply in use by DoD Departments and Agencies is the objective of this program.

3.  It is intended that the issue of SMD's affect DoD procurement through minimizing the proliferation of duplicate drawings for an item of supply.

4.  It is also the objective of the SMD Program that the resulting drawing be multi-user in actual implementation.

5  The application of this handbook is currently confined to the acquisition of microcircuits until such time that applicability to federal supply classes other than FSC 5962 is deemed appropriate.

6.  Comments, suggestions, or questions on this document should be addressed to Commander, Defense Logistics

*    Agency, DLA Land and Maritime, ATTN: VA, P. O. Box 3990, Columbus, OH 43218-3990 or emailed to

*    STD1835@dla.mil.  Since contact information can change, you may want to verify the currency of this address

*    information using the ASSIST Online database at https://assist.daps.dla.mil/.

*                                               SUMMARY OF CHANGE 1 MODIFICATIONS

1.  References to MIL-HDBK-512 has been changed to MIL-STD-3018, which supersedes it.

2.  References to MIL-STD-1835 and SD-19 have been added.

3.  References to ASME Y14.5M has been changed to ASME Y14.5, which supersedes it.

4.  The organization notated as ASME has been changed from American Society of Mechanical Engineers to

ASME International to reflect the current name.

5.  Section 2, and throughout, the web address for acquiring government specifications and standards has been changed to the current address for the Assist online services.

6.  Section 4.2.5.5, Classification of conformance inspections has been edited to include Group E which was missing.

7.  In various locations, Defense Supply Center Columbus has been changed to DLA Land Maritime to reflect the current name.

8.  Figures 1-6 has been changed to reflect current boiler plates.

9.  Where applicable, changes were made to comply with MIL-STD-967 for preparation of a military handbook.

ii