MIL-M-38510-655 Microcircuits, Digital, High Speed Cmos, Bus Transceivers With Three-State Outputs, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75

INCH-POUND MIL-M-38510/655A

22 July 2005

SUPERSEDING MIL-M-38510/655

30 September 1986

MILITARY SPECIFICATION

MICROCIRCUITS, DIGITAL, HIGH-SPEED CMOS, BUS TRANSCEIVERS WITH THREE-STATE OUTPUTS,

MONOLITHIC SILICON

Reactivated after 22 July. 2005 and may be used for new and existing designs and acquisitions.

This specification is approved for use by all Departments and  Agencies  of the Department of  Defense.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF 38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, high speed CMOS, logic microcircuits.  Two product assurance classes and a choice of case outlines and lead finishes are provided and are reflected in the complete Part or Identifying Number (PIN).  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 (see 6.3).

1.2  Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535 and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                              Circuit

01                                       Quadruple inverting bus transceiver with three-state outputs

02                                       Quadruple non-inverting bus transceiver with three-state outputs

03                                       Octal non-inverting bus transceiver with three-state outputs

04, 05                                 To be included later

06                                       Octal inverting bus transceiver with three-state outputs

07        Octal non-inverting or inverting bus transceiver with three-state outputs

08                                       Octal non-inverting bus transceiver with three-state outputs

09                                       Octal inverting bus transceiver with three-state outputs

53        Octal non-inverting bus transceiver with three-state outputs and TTL-input voltage compatibility

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1.2.3  Case outlines.  The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter               Descriptive designator                    Terminals              Package style

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P.O. Box 3990, Columbus, OH 43218-3990, or email to CMOS@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil/.

AMSC N/A                                                                                                                                                     FSC 5962