MIL-M-38510-61 Microcircuits, Digital, Ecl, Flip-Flops, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, ECL, logic gating microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48

MIL-M-38510/61C

1.3  Absolute maximum ratings.

Supply voltage range .............................................................................. 0 V to -7.0 V 

Input voltage range  ................................................................................ 0 V to VEE (most negative power 

                                                                                                                                supply voltage

Storage temperature range  .................................................................... -65° to +150°C Maximum power dissipation, (PD)  1/ 

      Device type 01 .................................................................................. 165 mW 

      Device type 02 .................................................................................. 190 mW 

      Device type 03 .................................................................................. 105 mW 

      Device type 04 .................................................................................. 200 mW  Lead temperature (soldering, 10 seconds) ............................................. +260°C Junction temperature (TJ) 2/ ................................................................... 165°C  Maximum output current ......................................................................... -50 mA Thermal resistance, junction to case (εJC):

  Cases E, F and 2 .................................................................................. (See MIL-STD-1835)  

  

1.4  Recommended operating conditions.

Supply voltage (VEE) ........................................................................... -5.46 V minimum to -4.94 V maximum Minimum high level input voltage (VIH) ............................................... -1.105 V at TC = 25°C

    (at 500 linear feet per minute) (ft/min)                                                    -1.000 V at TC = 125°C

                                                                                                                          -1.255 V at TC = -55°C

Maximum low level input voltage (VIL) ................................................ -1.475 V at TC = 25°C

    (at 500 linear ft/min)                                                                                   -1.400 V at TC = 125°C

                                                                                                                          -1.510 V at TC = -55°C

Normalized fanout (each output)   ...........................................................10      3/

    Case operating temperature range (TC) (at 500 linear ft/min).............. -55° to +125°C

    Case operating temperature (at still air)

       Device types 01, 02, 04 (cases E and F): ......................................... -55° to +125°C 

       Device type 03:

            (case E) ....................................................................................... -55° to +100°C

            (case F)  ....................................................................................... -55° to +110°C

Input data setup time, (tSETUP)

       Device type 01  .................................................................................  2.5 ns minimum

       Device type 02  .................................................................................  1.0 ns minimum

       Device type 03  .................................................................................  2.5 ns minimum

       Device type 04  .................................................................................  2.5 ns minimum Input data hold time, (tHOLD)

       Device type 01  .................................................................................  1.5 ns minimum

       Device type 02  .................................................................................  0.75 ns minimum

       Device type 03  .................................................................................  1.5 ns minimum

       Device type 04  .................................................................................  1.5 ns minimum

               

1/  Must withstand the added PD due to short-circuit test (e.g., IOS).

2/  Maximum junction temperature should not be exceeded except in accordance with allowable short 

      duration burn-in screening condition in accordance with MIL-PRF-38535.

3/  Device will fanout in both high and low levels to the specified number of data inputs on the same device

      type as that being tested.

2

Source:  https://assist.dla.mil  --  Downloaded: 

Check  the  source  to  verify  that  this  is  the  current  version  before  use.

For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business