MIL-M-38510-101 Microcircuits, Linear, Operational Amplifier, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42

MIL-M-38510/101K

Noise (Referred to input)	Symbol	S1	Measure		Measured equation	Parameter units
Noise (Referred to input)	Symbol	S1	Value	Units	Measured equation	Parameter units
Broadband	N1(BB)	Closed	E0	mV rms	E0 / 1000	µV rms
Popcorn	N1(PC)	Open	E0	mV pk	E0 / 1000	µV pk

NOTES:

1. RS = 20 kn for device types 01, 02, 07, and 08; RS = 100 kn for device types 03, 04, 05, and 06.

2. E0 is measured using an RMS voltmeter with a bandwidth of 10 Hz to 5 kHz and a peak detector simultaneously. Monitor the peak test for a minimum of 15 seconds. The loop bandwidth shall be at least 5 kHz.

FIGURE 6. Noise test circuit.