MIL-M-38510-101 Microcircuits, Linear, Operational Amplifier, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42

MIL-M-38510/101K

1.2.3 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:

Outline letter Descriptive designator Terminals Package style

A	2/	GDFP5-F14 or CDFP6-F14	14	Flat pack
B	2/	GDFP4-14	14	Flat pack
C		GDIP1-T14 or CDIP2-T14	14	Dual-in-line
D		GDFP1-F14 or CDFP2-F14	14	Flat pack
E		GDIP1-T16 or CDIP2-T16	16	Dual-in-line
F		GDFP2-F16 or CDFP3-F16	16	Flat pack
G		MACY1-X8	8	Can
H		GDFP1-F10 or CDFP2-F10	10	Flat pack
I		MACY1-X10	10	Can
P		GDIP1-T8 or CDIP2-T8	8	Dual-in-line
z		GDFP1-G10	10	Flat pack with gullwing leads
2		CQCC1-N20	20	Square leadless chip carrier

1.3 Absolute maximum ratings.

Supply voltage range (VCC) ............................................................................ ±22 V dc 3/ Input voltage range ......................................................................................... ±20 V dc 4/ Differential input voltage range ....................................................................... ±30 V dc 5/

Input current range ......................................................................................... -0.1 mA to +10 mA

Storage temperature range ............................................................................ -65°C to +150°C Output short-circuit duration ........................................................................... Unlimited 6/ Lead temperature (soldering, 60 seconds) ..................................................... +300°C

Junction temperature (TJ) ............................................................................... +175°C 7/

1.4 Recommended operating conditions.

Supply voltage (VCC) ...................................................................................... ±5 V dc to ±20 V dc

Ambient temperature range (TA) .................................................................... -55°C to +125°C

2/ Inactive package case outline.

3/ Voltages in excess of these may be applied for short-term tests if voltage difference does not exceed 44 volts.

4/ For supply voltages less than ±20 V dc, the absolute maximum input voltage is equal to the supply voltage.

5/ For device types 04, 06, and 07 only, this rating is ±1.0 V unless resistances of 2 kn or greater are inserted in series with the inputs to limit current in the input shunt diodes to the maximum allowable value.

6/ Short circuit may be to ground or either supply. Rating applies to +125°C case temperature or +75°C

ambient temperature.

7/ For short term test (in the specific burn-in and life test configuration when required and up to 168 hours maximum) TJ = +275°C.