MIL-M-38510-101 Microcircuits, Linear, Operational Amplifier, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42

INCH-POUND MIL-M-38510/101K

14 December 2005

SUPERSEDING MIL-M-38510/101J

07 February 2003

MILITARY SPECIFICATION

MICROCIRCUITS, LINEAR, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON

This specification is approved for use by all Departments and Agencies of the Department of Defense.

Inactive for new design after 13 July 1995.

The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535.

1.  SCOPE

1.1  Scope.  This specification covers the detail requirements for monolithic silicon, operational amplifiers.  Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number.  For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4).

1.1.2  Part or identifying number (PIN).  The PIN is in accordance with MIL-PRF-38535, and as specified herein.

1.2.1  Device types.  The device types are as follows:

Device type                                                                                             Circuit

01                                                         Single operational amplifier - internally compensated

02                                                         Dual operational amplifier - internally compensated

03                                                         Single operational amplifier - externally compensated

04                                                         Single operational amplifier - externally compensated

05                                                         Dual operational amplifier - externally compensated   1/

06                                                         Dual operational amplifier - externally compensated   1/

07                                                         Single operational amplifier, high speed

08                                                         Dual operational amplifier - internally compensated

1.2.2  Device class.  The device class is the product assurance level as defined in MIL-PRF-38535.

1/  Device types 05 and 06 may be monolithic, or they may consist of two separate, independent die.

Comments, suggestions, or questions on this document should be addressed to:  Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to linear@dscc.dla.mil.  Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.

AMSC N/A                                                                                                                                                          FSC 5962