MIL-M-38510-101 Microcircuits, Linear, Operational Amplifier, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, operational amplifiers. Two product assurance classes and a choice of case outlines and lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.4.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42

MIL-M-38510/101K

1.5 Power and thermal characteristics.

Case outlines	Maximum allowable power dissipation	Maximum eJC	Maximum eJA
A,B,D	350 mW at TA = +125°C	60°C/W	140°C/W
C,E,P	400 mW at TA = +125°C	35°C/W	120°C/W
G	330 mW at TA = +125°C	40°C/W	150°C/W
I	350 mW at TA = +125°C	40°C/W	140°C/W
H	330 mW at TA = +125°C	60°C/W	150°C/W
F	400 mW at TA = +125°C	35°C/W	120°C/W
z	330 mW at TA = +125°C	21°C/W	225°C/W still air
z	330 mW at TA = +125°C	21°C/W	142°C/W 500 LFPM
2	8/ at TA = +125°C	60°C/W	120°C/W

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATION

MIL-PRF-38535 - Integrated Circuits (Microcircuits) Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard for Microelectronics.

MIL-STD-1835 - Interface Standard Electronic Component Case Outlines

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

8/ PD = 102 mW for device type 01. PD = 75 mW for device type 03. PD = 149 mW for device type 04.