MIL-M-38510-763 Microcircuits, Digital, Advanced Cmos, Counters, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, advanced CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29

MIL-M-38510/763B

TABLE I. Electrical performance characteristics - Continued.

Test and MIL-STD-883 test method	Symbol	Test conditions 1/ -55°C s TC s +125°C 3.0 V s VCC s 5.5 V unless otherwise specified		Device type 2/	VCC	Group A subgroups	Limits 1/		Unit
							Min	Max
High level ground bounce noise	VGBH 8/ 9/	VLD = 2.5 V, IOH = -24 mA VIN = 4.5 V or 0.0 V See figure 4		02,04	4.5 V	4		2000	mV
				05				1000
Low level ground bounce noise	VGBL 8/ 9/	VLD = 2.5 V, IOL = 24 mA VIN = 4.5 V or 0.0 V See figure 4		02,04	4.5 V	4		2000	mV
				05				1000
Latch-up input/ output over- voltage	ICC (O/V1) 10/	tw � 100 µs tcool � tw 5 µs s tr s 5 ms 5 µs s tf s 5 ms Vtest = 6.0 V VCCQ = 5.5 V Vover = 10.5 V		All	5.5 V	2		200	mA
Latch-up input/ output positive over-current	ICC (O/I1+) 10/	tw � 100 µs tcool � tw 5 µs s tr s 5 ms 5 µs s tf s 5 ms Vtest = 6.0 V VCCQ = 5.5 V Itrigger = +120 mA		All	5.5 V	2		200	mA
Latch-up input/ output negative over-current	ICC (O/I1-) 10/	tw � 100 µs tcool � tw 5 µs s tr s 5 ms 5 µs s tf s 5 ms Vtest = 6.0 V VCCQ = 5.5 V Itrigger = -120 mA		All	5.5 V	2		200	mA
Latch-up supply over-voltage	ICC (O/V2) 10/	tw � 100 µs tcool � tw 5 µs s tr s 5 ms 5 µs s tf s 5 ms Vtest = 6.0 V VCCQ = 5.5 V Vover = 9.0 V		All	5.5 V	2		100	mA
Truth table test output voltage 3014	4/ 5/ 11/	VIH = 2.50 V VIL = 0.45 V verify output VO	M	02,04,05	3.0 V	7	L	H
			D				L	H
			P, L, R				L	H
		VIH = 3.70 V VIL = 0.60 V verify output VO		All	4.5 V	7,8	L	H
Maximum clock frequency	fMAX 12/	CL = 50 pF RL = 500 0 See figures 5 and 6		All	3.0 V	9,11	70		MHz
						10	55
				02	4.5 V	9,11	95
						10	80
				04		9,11	95
						10	90
				05		9,11	90
						10	80

See footnotes at end of table.