MIL-M-38510-58 Microcircuits, Digital, Cmos, Switches, Monolithic Silicon, Positive LogicThis specification covers the detail requirements for monolithic silicon, CMOS, logic microcircuits. Two product assurance classes and a choice of case outlines, lead finishes, and radiation hardness assurance RHA are provided and are reflected in the complete Part or Identifying Number PIN. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535 see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37

MIL-M-38510/58D

TABLE V. Radiation hardened end-point electrical parameters at 25°C.

Parameter	Test limits (All device types)	VDD
		Device types
		01, 02	51, 52
VTN VTP �VT ISS tPLH tPHL	0.3 V min 2.8 V max 1.4 V max 100 x max limit 1.35 x max limit 1.35 x max limit	VDD = 10 V VDD = 10 V VDD = 10 V VDD = 15 V VDD = 5 V VDD = 5 V	VDD = 10 V VDD = 10 V VDD = 10 V VDD = 18 V VDD = 5 V VDD = 5 V

TABLE VI. Bias during exposure to radiation.

Device type	Pin connections 1/
Device type	VDD = 10 V dc (through a 30 kn to 60 kn resistor)	VSS = GND	VDD = 10 V dc
01, 51	1, 4, 5, 6, 8, 11, 12, 13	7	14
02, 52	1, 4, 5, 6, 8, 11, 12, 13	7	14

1/ Pins not designated are open, or tied to 10 V dc through a 30 kn to 60 kn resistor.

5. PACKAGING

5.1 Packaging. For acquisition purposes, the packaging requirements are as specified in the contract or order

(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained

by the Inventory Control Point's packaging activity within the Military Defense Agency, or within the military service's

system commands. Packaging data retrieval is available from the managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

6. NOTES

6.1 Intended use. Microcircuits conforming to this specification are intended for original equipment design applications and logistic support of existing equipment.