MIL-M-38510-371 Microcircuits, Digital, Bipolar, Advanced, Low-Power Schottky Ttl, Flip-Flops, Monolithic SiliconThis specification covers the detail requirements for monolithic silicon, advanced, low-power Schottky TTL, flip flops, bistable logic microcircuits. Two product assurance classes and a choice of case outlines/lead finish are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, see 6.3.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88

1/    pins not referenced are N/c.

3.0 V -5.5 V

2/

                0.0 V

3.0 V -5.5 V

3/

0.0    V

4/    Method 3011 shall be used, except the output voltage shall be as specified herein, and the output current shall be operating rather than short circuit current.   The output conditions have been chosen to produce a current that closely approximates one half of the true short circuit output current los.

5/    Tests shall be performed in sequence, attributes data only.

6/    Output voltages shall be either:  (1) H 2.5 V minimum and L ≤ 0.4 V maximum when using a high-speed checker double comparator; (2) H 1.5 V and L ≤ 1.5 V when using high-speed checker single comparator.

7/    fMAX  limit is the frequency of the input pulse.  The output frequency shall be one-half the input frequency.

8/    llL  limits shall be as follows:

9/    A = 3.0 V minimum; B = 0.0 V or GND.

10/